View TM070WA22L06_147889.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

w
w
a D . w
aS t
ee h
4U t
om .c
w
w
w
t a .D
S a
e h
U t4 e
.c
m o
w
w
w
.D
a
aS t
ee h
4U t
om .c
REVISION HISTORY
DATE REVISION NO. Ver.0 PAGE Initial release DESCRIPTIONS
Tottori SANYO Electric Co., Ltd.
TM070WA-22L03
Ver.0
Page
NOTICES
1. Please carefully treat this spec since it includes the copyright-related contents. It is strictly prohibited to copy or reprint this spec regardless of partially or whole, without our prior written approval. 2. Content in this spec shall not guarantee any of the third party's intellectual property right or other patents. Tottori SANYO will not be liable for the industrial property issue arising between user and the third party. 3.This product is designed and manufactured only for general AV instruments usage. It is not suitable for the purpose or equipment that required extremely high reliability or safety. Ex: Aerospace instrument, control equipment for nuclear power or life-support. 4.Please use this product correctly according to operating conditions and precautions for use stated in this document. Please install safety proof in your designing to avoid human accident, fire accident and social damage which may be resulted from malfunction of this product.
5.Radiation proof design is not applied on this product. 6.Tottori SANYO will not be liable for any damages or disadvantages caused by our product in the event that user does not follow condition or precaution stated in our spec.
7.Separate inspection standard spec is applied for cosmetic criteria.
8.Should you have questions on this product, please kindly contact our sales section.
Tottori SANYO Electric Co., Ltd.
TM070WA-22L03
Ver.0
1/13
MECHANICAL CHARACTERISTICS
ITEM Module size Resolution Screen size Dot pitch Pixel pitch Active viewing area Bezel opening area Weight SPECIFICATION 167.0(W)x102.0(H)x17.0typ.(T) 480xR*E B(W)x234(H) G*E 7" (RGB Stripe) 0.107(W)x0.372(H) 0.321(W)x0.372(H) 154.1(W)x87.05(H) 158.1(W)x91.1(H) 320 TYP. UNIT mm pixel mm mm mm mm g
*
ABSOLUTE MAXIMUM RATINGS
SYMBOL CONDITIONS +12V VR,VB,VG VI VO TST Storage Operation TOP Ta*... 60*Z MIN -0.5 -0.3 -0.3 -0.3 -10 0 MAX 13.0 2.0 5.0 5.0 75 65 90 UNIT V V V V *Z %RH NOTE
Used for inverter as well
ITEM Power supply voltage Analogue RGB input Input signals Output signals Ambient temperature Humidity
Note 1),2) not beyond 240H Note 3)
Note 1) Care should be taken so that the LCD module may not be subjected to the temperature beyond this specification. Note 2) Ambient temperature shows temperature on LCD surface. Module temperature is apt to increase while it's driving due to CFL heat etc. Please design carefully not to exceed +85 degree C on every surface of LCD that should come to contact with any other equipment. Temperature for operation is one which only assures LCD operation. Contrast, response time, or other LCD quality is regulated under condition of Ta=+25 degree C. Note 3) Please be advised that dew condensation level should be less than maximum wet bulb temperature 58 degree C. Dew condensation may induce leak current, and also influence LCD performance.
*
MECHANICAL ENVIRONMENT
SYMBOL
-
ITEM Vibration Shock
CONDITIONS Storage Storage
MIN -
MAX (2.9) (100)
UNIT G G
NOTE Note 1)
XYZ 6ms/direction
Note 1) Frequency : 8 *33.3 Hz, Displacement : 1.3o, Sweep Vibration frequency : 33.3 *400Hz Sweep time : 15 min./1 sweep total test time : X,Y-2Hr*@*@*@ Z-4Hr w**Longer side x** Shorter side y** Height
:33.3 * 400Hz
Z
X
Y
Tottori SANYO Electric Co., Ltd.
TM070WA-22L01
Ver.0
Page
2/13
OPTICAL CHARACTERISTICS (1)
Ta=25*Z *@ , fV=60Hz ITEM Viewing angle range Contrast ratio Response time Color of CIE Coordinate Rise Fall White K tr tf x y AE =0,O =0 SYMBOL O CONDITIONS AE 0 = K* 5 AE 90 = AE =180 AE =270 At optimized viewing angle AE =0,O =0
MIN TYP MAX UNIT NOTE
Note 1),4),5)
65 65 40 65 100
-
30 20 0.305 0.313
Note 4)
deg.
ms.
Note 2),4) Note 3),4)
View point O AE=180* DATA Black White Black
100% AE=270* AE=90* B 90%
10% 0% AE AE=0* tr tf
Note 1) O andAEare defined as above figure.
Note 3) Response time
Note 2) Contrast ratio "j " is defined below formula.
Brightness at ON (White) j** Brightness at OFF (Black)
Note 4) Measurement codition
@ VIN=12.0V, VB,VR,VG = 0.7Vo-p AFollow brightness measurement condition in next item.
Note 5)
AE = AE = AE = AE =
0 90 180 270
(Down) (Right) (Up) (Left)
Tottori SANYO Electric Co., Ltd.
TM070WA-22L03
Ver.0
Page
3/13
OPTICAL CHARACTERISTICS (2)
Ta=25*Z ITEM Brightness SYM.CONDITIONS MIN TYP MAX B 360 *| UNIT cd/u NOTE
Note) The brightness shall be the following point. 1/2Hp Active area
1/2Vp
Fig.1 Measurement point
Vp :Total Number of Vertical pixel Hp :Total Number of horizontal pixel
Measurement equipment : BM-7(TOPCON Corp.) Measurement condition @ Ambient temperature : 25 2*Z A LCD : All pixels are WHITE B Measure after 30 minutes of CFL warm up. C VIN = 12V, VB,VR,VG = 0.7Vo-p
*
BACKLIGHT CHARACTERISTICS (REFERENCE ONLY)
Ta=25*Z ITEM SYM. CONDITIONS MIN TYP MAX VL IL fL VS1 VS2 tOL WL
*|
UNIT
NOTE
Lamp voltage Lamp current Operating frequency Start up voltage Start up voltage Lamp life Backlight power supply
740 *| 55 *| *|
*|
*|
Vrms at IL=4.5mArms
3.0 45 *| *| 10000 *|
4.5 mArms (Recommended value) 65 KHz (Recommended value)
1750 Vrms at Ta= 25*Z 1800 Vrms at Ta=-30*Z
*|
Hours at IL=4.5mArms, Note 1) W at IL=4.5mArms
4.5
*|
Note 1) CFL Lamp life indicates time from initial Lamp brightness to half of original brightness.
Tottori SANYO Electric Co., Ltd.
TM070WA-22L03
Ver.0
Page
4/13
Block Diagram
Tottori SANYO Electric Co., Ltd. TM070WA-22L03 Ver.0
Page
IF BLOCK QSPIN HSYIO VSYIO CKH CSY N/P L/R U/D SWC DM1 DM2 DM3 POLC POLV PWM TEST SWV VR VG VB VSH VCOM VGH VGL GND Power Supply Circuit Timing Contoroler
HSYI VSYI CSYO CSYI VR VB VG
* Video IC @ (video amp)
Panel ss e 480*~* RGB* ~234 i * j
Source Driver
VCO TFT Exdusive RGB
L/R U/D SWV DM1 DM2 DM3 VIN GND
/n PORT h
Power Supply Circuit
Level Shift Gate Voltage
5/13
INTERFACE PIN CONNECTION
PIN NO.SYMBOL I/O I HSYI 1 CSYO O 2 I CSYI 3 I VIN 4 I 5 VIN I 6 VR I 7 VB I 8 VG I 9 GND I 10 GND I 11 GND I 12 GND 13 GND h 14 VSYI I 15 L/R I 16 U/D 17 GND_1 I 18 GND_1 I 19 GND_1 I 20 SW-B O I 21 DM1 I 22 DM2 I 23 DM3 24 GND_1 I FUNCTION Input Horizontal Sync Signal (low active) Output Composite Sync Signal (*2) Input Composite Sync Signal (*2) Power Supply (+12V) Power Supply (+12V) Color Video Signal (Red) Color Video Signal (Blue) Color Video Signal (Green) GND (Signal) GND (Signal) GND (Backlight Inverter) GND (Backlight Inverter) GND (Backlight Inverter) Input Vertical Sync Signal (low active) Selection for horizontal scanning direction (*1) Selection for vertical scanning direction (*1) GND (*3) GND (*3) GND (*3) Selection for Power supply Selection for display mode (*2) Selection for display mode (*1) Selection for display mode (*2) GND (*3)
* Connector Specification* I/F CN:52559-2492 Molex Suitable matching fpc : 0.5x24pin W=12.5mm t=0.3mm
pin no.1
* Connection in standard specification* *iwide screen when upper half is white*j Note 1) It is normal to connect 15, 16, 22 pin with 20 pin connector. Note 2) 2, 3, 21, 23 terminal shall be connected to ground in 10K. Note 3) 17, 18, 19, 24 terminal shall be connected to ground.
Tottori SANYO Electric Co., Ltd.
TM070WA-22L03
Ver.0
Page
6/13
ELECTRICAL CHARACTERISTICS
ITEM Power Supply Voltage
Horizontal Sync
frequency
pulse width
Ta=25*Z
SYMBOL VIN
HSYI HSYI HSYI VSYI VSYI
Signal H-L Rising time frequency Vortical sync pulse width Signal Input Video Signals
Input Signals Input Signals Voltage
Power Supply for selection
VB VR VG VIH VIL VIH VIL V+*|VSW-B IIN WS
Power Supply current Power Supply
MIN TYP MAX UNIT NOTE 11.7 12.0 12.3 V 15.13 15.73 16.33 kHz 4.2 4.7 5.2 Es 0.5 *| *| Es H/290 H/262 H/245 Hz 2H 3H 5H Es 0.7o-p V Note 1) 0.7o-p V 0.7o-p V 3.5 *| *| High level V Note 2) 1.5 *| Low level V *| 2.5 High level *| V Note 3) *| 2.1 *| *| Low level V Hysteresis 0.4 *| *| V 5 *| *| V Note 4) *| V *| VIN=12.0V 500 *| mA Note 5) 6 W *|
Conditions
Note 1) Symmetric terminal name : VR,VG,VB (Internal 75 termination) Note 2) Symmetric terminal name : L/R,V/D,DM2 (CMOS Schmitt INPUT) Note 3) Symmetric terminal name : HSYI,VSYI (CMOS OUTPUT) Note 4) Symmetric terminal name : SW-B (for L/R,V/D,DM2 connection) Note 5) Under the following condition : Display pattern : ALLBLACK FULL MODE (fv : 60Hz, VIN = +12V, VR/VG/VB = 0.7o-Pv) * Volume adjust Bright Volume Contrast Volume B Sub Contrast R Sub Contrast 24pin SIG_INPUT
@
Note) Designated screw driver is strongly requested for adjustment of VR.
Tottori SANYO Electric Co., Ltd.
TM070WA-22L03
Ver.0
Page 7/13
Input signal timing (Horizontal
Vertical) Pixel clock frequency 9.52MHz
Horizontal sync signal (605dot) 63.55uS HSYI 4.73uS 6.41uS (45dot) (61dot) 50.42uS (480dot) VR,VB,VG 11.14uS (106dot) Display Period Horizontal Blanking period Horizontal Blanking period 0.7Vo-p 1.99u (19dot)5Vo-p
Vertical sync signal 16.650mS(262H) VSYI 0.191mS (3H) 1.080mS(17H) 0.508mS(8H) 5Vo-p
14.871mS(234H) VR,VB,VG 1.271mS (20H) Vertical Blanking period Display Period Vertical Blanking period 0.7Vo-p
Note 1) All are in standard value. Minor adjustments with in electrical characteristic are possible. Note 2)Above timings are recommendable value calculated from dot clocks, which shall not be considered as fixed value.
Tottori SANYO Electric Co., Ltd.
TM070WA-22L03
Ver.0
Page
8/13
PRECAUTIONS (INSTRUCTIONS FOR SAFE AND PROPER USE)
1.Instructions for safety (1) Please do not disassemble or modify LCD module to avoid the possibility of electric shock, damage of electronic components, scratch at display surface or invasion of foreign particles. In addition, such activity may result in fire accident due to burning of electronic component. LCD module disassembled or modified by customer is out of warranty. Please be careful in handling of LCD module with broken glass. When the display glass breaks, please pay attention not to injure your finders. The display surface has the plastic film attached, which prevents dispersion of glass pieces, however, touching broken edge will injure your fingers. Also CFL (Cold Cathode Fluorescent Lamp) is made of glass, therefore please pay attention in the same way. Please do not touch the fluid flown out of broken display glass. Should it stick to hand or clothes, wipe off with soap or alcohol immediately and then wash it with water. Should the fluid get in eyes, wash eyes immediately with washing lotion for more 15 minutes and then consult the doctor. CFL contains mercury inside. Please follow regulations or rules by local autonomy at its disposal. Before handing LCD module, please switch off the power supply.
(2)
(3)
(4) (5)
2.Instructions for designing (1) Mounting of LCD Designing of mounting parts should be adequate so that LCD module is not putted stresses (ex. Warp or fortion), to achieve good display quality. Heat radiation Required CFL generates heat at lighting and causes temperature rise inside system. Therefore, designing to radiate heat like radiation slits at cabinet is recommended to meet the specified operating temperature range for LCD module. Noise on power line Spike noise contained in power line causes abnormal operation of driving circuit and abnormal display. To avoid it, spike noise should be suppressed below VDD +/- 200mVp-p. (In any case, absolute maximum rating should be kept.) Absolute maximum rating Absolute maximum rating specified in this specification has to be kept in any occasion. It shows the maximum that shall not be exceeded. Exceeding it may cause burning or non-recoverable break of electronic components in circuit. Please make system design so that absolute maximum rating is not exceeding even if ambient temperature, input signal and components are varied. Protection cover and cut-off filter for ultraviolet rays When LCD module is used under severe condition like outdoor, it is recommended to use transparent protection cover over display surface to avoid scratches and invasion of dust and water. In addition, when LCD module is exposed to direct sun light for long time, use of cut-off filter for ultraviolet rays is also recommended. Please be careful not to get condensation.
(2)
(3)
(4)
(5)
Tottori SANYO Electric Co., Ltd.
TM070WA-22L03
Ver.0
9/13
3.Instructions for use and handling (1) C-MOS LSI and semiconductors are easily damaged by static discharge. LCD module should be handled on conductive mat by person grounded with wrist strap etc. to avoid getting static electricity. Please be careful not to generate static electricity during operation. Protection against dust and stain LCD module should be handled in circumstance as clean as possible. It is recommended to wear fingerstalls or ductless and soft advance to avoid getting dust or stain on display surface.
(2)
gloves
in
(3)
Protection film for display surface It is recommended to remove protection film at nearly final process of assembling to avoid getting scratch or dust. Please be requested, when removing protection film, to pick up the edge of the film carefully by pincette. Which edges are obtuse and coated with PTFE or stick the glue tape at the edge to remove slowly with more than 3 seconds. Removal hasty shall be avoided to prevent static electricity which may cause damage on semiconductor or electric devices in LCD module. Contamination of display surface When display surface of LCD module is contaminated, please wipe the surface softly with cotton swab or clean cloth. If it is not enough, please take it away with by sticky tape or wipe the surface with cotton swab or clean cloth containing benzine. In this case, please be careful so that benzine dose not get in inside of LCD module, because it may be damaged. Water drop on LCD surface Please do not leave LCD module with water drop. When the Display surface gets water drop, please wipe it off with cotton swab or soft cloth immediately, otherwise display surface will be deteriorated. If water gets in inside of LCD module, circuit may be damaged. Please make sure that LCD module is not warped pr twisted at installation into system. Even temporary warp or twist may be the cause of failure. Please be careful not to apply strong mechanical stress like drop or shock to LCD module. Such stress may cause break of display grass and CFL or may be the cause of failure. Pressure to display surface Please be careful not to apply strong pressure to display surface. Such pressure may cause scratches at surface or may be the cause of failure. Protection against scratch Please be careful not to hit, press or rub the display surface with hard material like tools. In addition, do not put heavy or hard material on display surface, and do not stack LCD modules. Polarizer at front surface can be easily scratched.
(4)
(5)
(6) (7)
(8)
(9)
(10) Plugging in of connector Please be careful not to apply strong stress to connector part of LCD module at plugging in or out, because strong stress may damage the inside connection. At plugging in connector, place LCD module on the flat surface and hold the backside connector on LCD module. Keep the back of the connector onto the plain surface when inserting it. Please make sure that connector is properly plugged in. In addition, please be careful not to put the connecting cable between cabinet of system and LCD module at installing LCD module into system.
Tottori SANYO Electric Co., Ltd.
TM070WA-22L03
Ver.0
10/13
(11) About outer VR for adjustment Outer VR for adjustment shall not be rotated unless necessary. If needed, please use screw driver for adjustment which TOTTORI SANYO recommends. (12) Switching off before plugging in connector Please make sure that power is switched off before plugging in connector. If power is on at plugging in nor out, circuit of LCD module may be damaged. When LCD is switched on for test or inspection, please make sure that power supply and signals of driving system meet the specified power sequence. (13) Response speed (optical response) of LCD display is dependent temperature. Under low temperature, response speed is slower. Also brightness and chromaticity change slightly depending on temperature. on
(14) Slow light-up of CFL under low temperature Under low temperature, start-up of CFL ge " *OE (The time from switch " " . -on to stable lighting becomes longer.) As characteristic of CFL, operation under low temperature makes the life time shorter. To avoid this, it is recommended to operate under normal temperature. (15) Condensation Please be careful not to get condensation. LCD module may get condensation on its display surface and inside in the circumstance where temperature changes much in short time. Condensation can cause deterioration or failure. (16) Remaining of image Displaying the same pattern for long time may cause remaining of image even after changing the pattern. This is not failure but will disappear with time. 4.Instructions for storage and transportation (1) Storage Please store LCD module in the place where is free from direct sunlight ambient and low humid condention so as not to cause condensation. Since sudden temperature change may cause condensation, please store in circumstance of stable temperature. Stacking number Since excessive weight causes deformation and damage of carton box, please stack only up to the number stated on carton box for storage and transportation. Handling Since LCD module consists of grass and precise electronic components, it will be damaged by excessive shock and drop. Therefore please handle the carton box carefully to minimize shock at loading, reloading and transportation.
(2)
(3)
Tottori SANYO Electric Co., Ltd.
TM070WA-22L03
Ver.0
11/13
Tottori SANYO Electric Co., Ltd.
OUT LINE DRAWING
Bright Volume Contrast Volume 1680.5** 83.5 77.04 5043.524 1030.5** 45.1 A 9 Outer dimensions*@168*~103*~17** Viewing area*@ *@154.08*~87.048** 43.524 45.1 74.4 A 6 4 A 32 Lot label Hooking point A : M2.3(7 off*j 32 73.4 4 77.04 170.5 4-R2.2 9 34 10 A6 A B Sub Con 39.9 Sub R Con from uco (83.5) 55
27 6
TM070WA-22L03
Ver.0
@ TORISAN TFT-LCM TM070WA-22L03
A 3.9
A
Page 12/13
Label L abel specification 56mm 1 3 34mm 4 5 2
snqhrm*@ses*|kbl slOVOv-QQkOR *-*-*-*-*-*-*-*-*-*-*-*-*-*-*- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*- lcd*@hm*@iom
@*@Company A*@Type of LCD LCD module lot No. B*@Model name lot*-*-*-*-*-*-*-*-*-*-*-*-*-*-*- C*@LCD module No. 2015 digits D*@LCD panel lot No. digits Production date *@w*cOctober *@x*cNovember Serial No. *@y*cDecember In-house control No.
Label location
snqhrm*@ses*|kbl slOVOv-QQkOR *-*-*-*-*-*-*-*-*-*-*-*-*-*-*- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*- lcd*@hm*@iom
Bromic incombustible material
Tottori Sanyo's products do not include bromic incombustible materials which produce dioxin.
CFC(Chlorofluoro carbon = Freon )
CFC and its substitutes. Assembly process, edulcorating process and raw materials are free from CFC ( = Chlorofluoro carbon = Freon ) and its substitutes.
Tottori SANYO Electric Co., Ltd.
TM070WA-22L03
Ver.0 Page 13/13

▲Up To Search▲

Price & Availability of TM070WA22L06

	To Download TM070WA22L06 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .